Central Products | English

English
Restart the smart unit board at NET2 port
For certain scenarios, local monitoring SCADA loss communication to the inverter due to plant network error, which causes the local monitoring SCADA unable to receive the data from the inverter. Installers can try to ping the IP address of the ...
SG2500/SG2500MV Turnkey inverter fault FAQs
1. Our inverter shows Branch breaker fault. Check if all DC branch breaker are CLOSED and observe the DC breaker status at Run- information. Leaving un-used DC switches also will trigger the alarm. User may switch the breaker to CLOSE position. 2. ...

Central Products | English | Knowledge Base